Home › TRANSMISSION ยท U250E AUTOMATIC TRANSAXLE › DIFFERENTIAL CASE

DIFFERENTIAL CASE > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT DIFFERENTIAL RING GEAR


    C134908E01
  1. Put matchmarks on the front differential ring gear and differential case.



    C134909E01
  1. Remove the 10 bolts.



    C134910E01
  1. Using a plastic hammer, tap on the front differential ring gear to remove it from the case.



2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING


    C134911E01
  1. Using SST, remove the front differential case front tapered roller bearing from the differential case.

    SST
    09950-00020  
    09950-00030  
    09950-40011   (09957-04010)
    09950-60010   (09951-00480)



    D025596E02
  1. Using SST, remove the front differential case front tapered roller bearing outer race.

    SST
    09308-00010  



3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING


    C134912E01
  1. Using SST, remove the front differential case rear tapered roller bearing from the differential case.

    SST
    09950-00020  
    09950-00030  
    09950-40011   (09955-04061, 09957-04010, 09958-04011)
    09950-50013   (09951-05010, 09952-05010, 09953-05020, 09954-05021, 09955-05010)
    09950-60010   (09951-00480)
    09950-70010   (09951-07100)



    D025598E01
  1. Using SST, remove the front differential case rear tapered roller bearing outer race.

    SST
    09308-00010  



4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN


    C134913
  1. Using a pin punch and hammer, remove the straight pin.

    NOTICE:
    Before removing the straight pin, unstake it with a pin punch.



5. REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT


    C134914E02
  1. Remove the front No. 1 differential pinion shaft from the differential case.



6. REMOVE FRONT DIFFERENTIAL SIDE GEAR


    C134915E01
  1. Remove the 2 front differential pinions, 2 pinion thrust washers, 2 front differential side gears and 2 side gear thrust washers from the differential case.



7. REMOVE TRANSAXLE HOUSING OIL SEAL


    C134916E01
  1. Using SST and a hammer, remove the oil seal.

    SST
    09950-70010   (09951-07200)
    09950-60010   (09951-00630)



8. REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL


    C134917E01
  1. Using SST and a hammer, remove the oil seal.

    SST
    09950-70010   (09951-07100)
    09608-10010