LUGGAGE DOOR HINGE TORSION BAR > REMOVAL |
| 1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT |
| 2. REMOVE SPARE WHEEL COVER CLAMP |
| 3. REMOVE SPARE WHEEL COVER ASSEMBLY |
| 4. REMOVE LUGGAGE COMPARTMENT SIDE TRAY ASSEMBLY |
![]() |
Remove the bolt.
Disengage the clip and remove the luggage compartment side tray assembly.
| 5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK |
![]() |
Remove the 2 screws and the 2 No. 1 luggage compartment trim hooks.
| 6. REMOVE REAR FLOOR FINISH PLATE |
![]() |
Disengage the 7 clips and remove the rear floor finish plate.
| 7. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH |
![]() |
Remove the 2 clips and the luggage compartment inner trim cover LH.
| 8. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH |
![]() |
Remove the 2 clips and the luggage compartment inner trim cover RH.
| 9. REMOVE LUGGAGE DOOR HINGE TORSION BAR RH |
![]() |
Disconnect the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support as shown in the illustration.
![]() |
Using SST, disconnect the luggage door hinge torsion bar RH from the luggage door hinge and the right side of the vehicle body as shown in the illustration.
![]() |
Remove the luggage door hinge torsion bar RH from the left side of the vehicle body as shown in the illustration.
| 10. REMOVE LUGGAGE DOOR HINGE TORSION BAR LH |
![]() |
Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support as shown in the illustration.
![]() |
Using SST, disconnect the luggage door hinge torsion bar LH from the luggage door hinge and the left side of the vehicle body as shown in the illustration.
![]() |
Remove the luggage door hinge torsion bar LH from the right side of the vehicle body as shown in the illustration.
| 11. REMOVE LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT |
![]() |
Remove the luggage compartment door torsion bar support as shown in the illustration.