Home › BODY ELECTRICAL › LIGHTING › PERSONAL LIGHT ASSEMBLY

PERSONAL LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT ROOF CONSOLE BOX ASSEMBLY (w/ Sliding Roof)


    E119968
  1. Apply battery voltage to the roof console box assembly.

  1. Check that the interior light and personal lights come on.

    OK :
    Measurement Condition
    Switch Condition
    Specified Condition
    Battery positive (+) → Terminal 7
    Battery negative (-) → Terminal 6
    Interior light switch in DOOR
    Interior light comes on
    Battery positive (+) → Terminal 7
    Battery negative (-) → Terminal 8
    Interior light switch ON
    Interior light comes on
    Battery positive (+) → Terminal 7
    Battery negative (-) → Terminal 8
    Front RH personal light switch ON
    Front RH personal light comes on
    Battery positive (+) → Terminal 7
    Battery negative (-) → Terminal 8
    Front LH personal light switch ON
    Front LH personal light comes on

    If the result is not as specified, replace the bulb or roof console box assembly.



2. INSPECT ROOF CONSOLE BOX ASSEMBLY (w/o Sliding Roof)


    E119968
  1. Apply battery voltage to the roof console box assembly.

  1. Check that each personal light comes on.

    OK :
    Measurement Condition
    Switch Condition
    Specified Condition
    Battery positive (+) → Terminal 7
    Battery negative (-) → Terminal 8
    Front RH personal light switch ON
    Front RH personal light comes on
    Battery positive (+) → Terminal 7
    Battery negative (-) → Terminal 8
    Front LH personal light switch ON
    Front LH personal light comes on

    If the result is not as specified, replace the bulb or roof console box assembly.