Home › BODY ELECTRICAL › LIGHTING › LUGGAGE COMPARTMENT ROOM LIGHT

LUGGAGE COMPARTMENT ROOM LIGHT > INSPECTION

for Preparation Click here



1. INSPECT NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY


    B113722
  1. Apply battery voltage to the No. 1 luggage compartment light assembly connector.

  1. Check that the No. 1 luggage compartment light comes on.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 1
    Battery negative (-) → Terminal 2
    Luggage compartment light comes on

    If the result is not as specified, replace the bulb or luggage compartment light assembly.