ACCELERATOR PEDAL ROD > ON-VEHICLE INSPECTION |
| 1. CHECK ACCELERATOR PEDAL ROD |
Measure the voltage.
![]() |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position.
Turn the intelligent tester ON.
Select the menu items: DIAGNOSIS / ENHANCED OBD II / DATA LIST / ALL / ACCEL POS #1, ACCEL POS #2.
Operate the accelerator pedal, and then check that the ACCEL POS #1 and ACCEL POS #2 values are within the specifications.
| Accelerator Pedal Condition | Specified Condition |
| Released | 0.5 to 1.1 V |
| Depressed | 2.5 to 4.5 V |
| Accelerator Pedal Condition | Specified Condition |
| Released | 1.2 to 2.0 V |
| Depressed | 3.4 to 5.0 V |