REAR SUNSHADE ASSEMBLY > REMOVAL |
| 1. REMOVE REAR SEAT CUSHION ASSEMBLY |
![]() |
Detach the 2 front hooks of the seat cushion from the vehicle body.
Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
Repeat the step above for the other hook.
Remove the seat cushion.
| 2. REMOVE REAR SEAT HEADREST ASSEMBLY |
| 3. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY |
| 4. REMOVE REAR SEATBACK COVER |
![]() |
Using a screwdriver, detach the claws and remove the 2 rear seatback covers.
| 5. REMOVE SEPARATE TYPE REAR SEATBACK ASSEMBLY LH |
![]() |
Separate the 2 rear seat belts.
![]() |
Disengage the 3 clamps and then separate the cover.
![]() |
Remove the 2 bolts and 2 nuts and separate type rear seatback assembly LH.
| 6. REMOVE SEPARATE TYPE REAR SEATBACK ASSEMBLY RH |
![]() |
Separate the rear seat belt.
![]() |
Disengage the 3 clamps and then separate the cover.
![]() |
Remove the 2 bolts and 2 nuts and separate type rear seatback assembly RH.
| 7. REMOVE CENTER SEATBACK ASSEMBLY |
![]() |
Remove the 2 bolts and center seatback assembly.
| 8. REMOVE REAR DOOR SCUFF PLATE LH |
![]() |
Disengage the 5 claws and 2 clips, and remove the rear door scuff plate LH.
| 9. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH |
| 10. REMOVE REAR DOOR SCUFF PLATE RH |
| 11. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH |
| 12. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY LH |
![]() |
Remove the bolt.
Disengage the 2 clips and the claw and then separate the reclining remote control lever sub-assembly.
![]() |
Separate the rear seat reclining control cable and remove the reclining remote control lever sub-assembly.
| 13. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY RH |
| 14. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH |
![]() |
Remove the 2 nuts and child restraint seat anchor bracket sub-assembly.
| 15. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH |
![]() |
Remove the bolt and disconnect the floor end of the rear seat inner with center belt assembly LH.
| 16. REMOVE ROOF SIDE INNER GARNISH LH |
![]() |
Disengage the 5 clips and 2 claws, and remove the roof side inner garnish LH.
| 17. REMOVE ROOF SIDE INNER GARNISH RH |
| 18. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY (for LH Side) |
![]() |
Remove the bolt and disconnect the floor end of the rear seat outer belt assembly.
| 19. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY (for RH Side) |
![]() |
Remove the bolt and disconnect the floor end of the rear seat outer belt assembly.
| 20. REMOVE REAR SEAT SHOULDER BELT COVER |
![]() |
Using a screwdriver, disengage the 4 claws and remove the rear seat shoulder belt cover.
| 21. REMOVE REAR SEAT SHOULDER BELT HOLE COVER |
![]() |
Using a screwdriver, disengage the 4 claws and remove the rear seat shoulder belt hole cover.
| 22. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY |
![]() |
Disconnect the connector.
Disengage the 4 clips and the 5 claws.
Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly then remove the package tray trim panel assembly.
| 23. REMOVE CURTAIN RAIL END CAP LH |
![]() |
Disengage the 2 claws and remove the curtain rail end cap LH.
| 24. REMOVE CURTAIN RAIL END CAP RH |
| 25. REMOVE REAR WINDOW SHADE ASSEMBLY |
![]() |
Remove the rear window shade assembly as shown in the illustration.