WATER PUMP > REMOVAL |
| 1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE |
| 2. SECURE ENGINE STAND |
| 3. REMOVE NO. 1 ENGINE MOUNTING BRACKET FRONT LH |
![]() |
Remove the 6 bolts and No. 1 engine mounting bracket front LH.
| 4. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY |
![]() |
Remove the 2 bolts, 2 idler pulley cover plates and 2 idler pulley sub-assemblies.
| 5. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY |
![]() |
Remove the 5 bolts and V-ribbed belt tensioner assembly.
| 6. REMOVE WATER PUMP PULLEY |
![]() |
Using SST, hold the water pump pulley.
Remove the 4 bolts and water pump pulley.
| 7. REMOVE WATER INLET HOUSING |
![]() |
Disconnect the water hose.
Remove the 2 bolts, nut and water inlet housing.
![]() |
Remove the water inlet housing gasket and water outlet pipe O-ring.
| 8. REMOVE WATER PUMP ASSEMBLY |
![]() |
Remove the 16 bolts, water pump assembly and water pump gasket.