Home › ENGINE ยท 2GR-FE › COOLING › WATER PUMP

WATER PUMP > REMOVAL

for Preparation Click here



1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

HINT:
Click here



2. SECURE ENGINE STAND

HINT:
Click here



3. REMOVE NO. 1 ENGINE MOUNTING BRACKET FRONT LH


    A129646
  1. Remove the 6 bolts and No. 1 engine mounting bracket front LH.



4. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY


    A129645E01
  1. Remove the 2 bolts, 2 idler pulley cover plates and 2 idler pulley sub-assemblies.



5. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY


    A135522
  1. Remove the 5 bolts and V-ribbed belt tensioner assembly.



6. REMOVE WATER PUMP PULLEY


    A128112E03
  1. Using SST, hold the water pump pulley.

    SST
    09960-10010   (09962-01000, 09963-00700)

  1. Remove the 4 bolts and water pump pulley.



7. REMOVE WATER INLET HOUSING


    A133375E01
  1. Disconnect the water hose.

  1. Remove the 2 bolts, nut and water inlet housing.



    A128120
  1. Remove the water inlet housing gasket and water outlet pipe O-ring.



8. REMOVE WATER PUMP ASSEMBLY


    A094889
  1. Remove the 16 bolts, water pump assembly and water pump gasket.