Home › ENGINE ยท 2GR-FE › COOLING › RADIATOR

RADIATOR > INSPECTION

for Preparation Click here



1. INSPECT LOCK PLATE


    A087087E06
  1. Inspect the lock plate for damage.

    HINT:
    1. If the sides of the lock plate groove are deformed, reassembly of the tank will be impossible. Therefore, first correct the shape of the lock plate groove with pliers or a similar object, if necessary.
    2. Water leakage will result if the bottom of the lock plate groove is damaged or dented. Repair or replace the locking plate if necessary.

    NOTICE:
    The radiator can only be recaulked 2 times. After recaulking 2 times, the radiator core must be replaced.