RADIATOR > DISASSEMBLY |
| 1. REMOVE DRAIN PLUG |
Remove the drain plug.
Remove the O-ring.
| 2. REMOVE RADIATOR TANK UPPER |
![]() |
Install the claw to the overhaul handle, inserting it in the hole in part A as shown in the illustration.
While gripping the handle, adjust the stopper bolt so that dimension B is as shown in the illustration.
![]() |
Using SST to release the caulking, grip the handle until stopped by the stopper bolt.
![]() |
Lightly tap the bracket of the radiator (or radiator hose inlet or outlet) with a soft-faced hammer and remove the tank.
Remove the O-ring.
| 3. REMOVE RADIATOR TANK LOWER |