Home › ENGINE ยท 2GR-FE › COOLING › RADIATOR

RADIATOR > DISASSEMBLY

for Preparation Click here



1. REMOVE DRAIN PLUG
  1. Remove the drain plug.

  1. Remove the O-ring.



2. REMOVE RADIATOR TANK UPPER


    A104619E03
  1. Install the claw to the overhaul handle, inserting it in the hole in part A as shown in the illustration.

    SST
    09230-01010   (09231-01010, 09231-01030)

  1. While gripping the handle, adjust the stopper bolt so that dimension B is as shown in the illustration.

    Dimension B:
    0.2 to 0.3 mm (0.008 to 0.012 in.)

    NOTICE:
    If the stopper bolt is not adjusted, the claw may be damaged.



    A128137E02
  1. Using SST to release the caulking, grip the handle until stopped by the stopper bolt.

    SST
    09230-01010   (09231-01010, 09231-01030)



    A128138E01
  1. Lightly tap the bracket of the radiator (or radiator hose inlet or outlet) with a soft-faced hammer and remove the tank.

  1. Remove the O-ring.



3. REMOVE RADIATOR TANK LOWER

HINT:
Removal procedure of the radiator tank lower is the same as that of the radiator tank upper.