Home › ENGINE ยท 2GR-FE › LUBRICATION › OIL PUMP

OIL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL OIL PUMP COVER


    A128010E02
  1. Coat the drive and driven rotors with engine oil and place them into the timing chain cover with the marks facing outward (oil pump cover side). Check that the rotors revolve smoothly.



    A094627E02
  1. Install the oil pump cover with the 8 bolts.

    Torque:
    9.1 N*m{ 93 kgf*cm , 81 in.*lbf }

    Bolt length 
    Item
    Length
    Bolt A
    22 mm (0.87 in.)
    Bolt B
    40 mm (1.58 in.)



2. INSTALL OIL PUMP RELIEF VALVE


    A128008
  1. Coat the oil pump relief valve with engine oil.

  1. Insert the relief valve and relief valve spring into the oil pump cover hole.

  1. Using a 27 mm socket wrench, install the plug.

    Torque:
    49 N*m{ 500 kgf*cm , 37 ft.*lbf }