Home › ENGINE ยท 2GR-FE › FUEL › FUEL PUMP

FUEL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY


    A133534E01
  1. Apply a light coat of spindle oil or gasoline to a new O-ring, and install it to the fuel pressure regulator.



    A065037
  1. Push in the fuel pressure regulator to the fuel filter.



2. INSTALL FUEL PUMP


    A079496E01
  1. Apply a light coat of gasoline or grease to the O-ring of the fuel pump.

  1. Push in the fuel pump to the fuel filter.



3. INSTALL FUEL PUMP HARNESS


    A079495E05
  1. Connect the connector (*1).

  1. Install the fuel pump harness (*2).



4. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY


    A129485E02
  1. Connect the fuel pump connector (*1).

  1. Install the fuel suction plate.



5. INSTALL FUEL SENDER GAUGE ASSEMBLY


    A136741E01
  1. Slide the fuel sender gauge to engage with the claw (*1).

  1. Connect the fuel sender gauge connector (*2).



6. INSTALL FUEL PUMP CUSHION RUBBER


    A079492E01
  1. Install the fuel pump cushion rubber to the fuel pump.



7. INSTALL NO. 2 FUEL SUCTION SUPPORT


    A129487
  1. Install the No. 2 fuel suction support.