EXHAUST PIPE > REMOVAL |
| 1. REMOVE EXHAUST TAIL PIPE ASSEMBLY |
Remove the 4 nuts and 2 exhaust tail pipes.

Remove the 2 gaskets from the exhaust tail pipes.
| 2. REMOVE EXHAUST CENTER PIPE ASSEMBLY |
Remove the 2 bolts, 2 nuts and exhaust center pipe assembly.

Remove the gasket from the exhaust center pipe assembly.
| 3. REMOVE FRONT EXHAUST PIPE NO. 1 SUPPORT BRACKET |
![]() |
Remove the 2 nuts and front support brackets.
| 4. REMOVE EXHAUST FRONT PIPE ASSEMBLY |
Disconnect the 2 heated oxygen sensor (bank 1, 2 sensor 2) connectors.
Remove the 2 nuts from the exhaust front pipe (left bank exhaust manifold side).

Remove the 2 nuts from the exhaust front pipe (right bank exhaust pipe manifold side).
Remove the exhaust front pipe.
Remove the 2 gaskets from the exhaust front pipe.
| 5. REMOVE HEATED OXYGEN SENSOR (for Bank 1) |
![]() |
Using SST, remove the oxygen sensor.
| 6. REMOVE HEATED OXYGEN SENSOR (for Bank 2) |
![]() |
Using SST, remove the oxygen sensor.
| 7. REMOVE REAR EXHAUST PIPE NO. 1 SUPPORT BRACKET |
![]() |
Remove the 2 bolts and rear support bracket.