REAR AXLE HUB AND BEARING > ON-VEHICLE INSPECTION |
| 1. REMOVE REAR WHEEL |
| 2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY |
![]() |
Remove the bolt and separate the flexible hose from the shock absorber.
![]() |
Remove the 2 bolts and separate the rear disc brake caliper assembly.
| 3. REMOVE REAR DISC |
![]() |
Put matchmarks on the rear disc and the axle hub.
![]() |
Release the parking brake and remove the rear disc.
| 4. INSPECT REAR AXLE HUB BEARING LOOSENESS |
![]() |
Using a dial indicator, check for looseness near the center of the axle hub.
| 5. INSPECT REAR AXLE HUB RUNOUT |
![]() |
Using a dial indicator, check for runout on the surface of the axle hub outside the hub bolt.
| 6. INSTALL REAR DISC |
![]() |
Aligning the matchmarks, install the rear disc.
| 7. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY |
![]() |
Install the rear disc brake caliper with the 2 bolts.
![]() |
Install the rear flexible hose with the bolt.
| 8. INSTALL REAR WHEEL |