Components
| Function
|
Brake actuator assembly
| - Composed of the holding solenoid valve, pressure reduction solenoid valve, pump motor, reservoir, etc., and adjusts the hydraulic pressure applied to each wheel cylinder.
- Houses the skid control ECU.
|
Skid control ECU
| Processes the signals sent from each sensor to control ABS and EBD.
|
Speed sensor
| Detects speed of each wheel and inputs the data into the skid control ECU.
|
Master cylinder
| Generates pressure according to pedal effort.
|
Stop light switch
| Illuminates the stop light when the brake pedal is depressed. (Sends a brake on signal to the skid control ECU)
|
Solenoid relay
| - Supplies power to each solenoid.
- Housed in the skid control ECU.
|
Motor relay
| - Supplies power to the pump motor.
- Housed in the skid control ECU.
|
ABS warning light
| - Comes on to inform the driver that a malfunction in the ABS and EBD has occurred.
- Blinks to output DTC.
|
BRAKE warning light
| - Comes on to inform the driver that the parking brake is on when the system is normal or the brake fluid level has decreased.
- Comes on to inform the driver that a malfunction in the EBD has occurred.
|