ELECTRICAL KEY OSCILLATOR (for Front Floor) > INSTALLATION |
| 1. INSTALL ELECTRICAL KEY OSCILLATOR |
![]() |
Engage the clamp and install the electrical key oscillator.
| 2. INSTALL FLOOR CARPET BRACKET RH |
| 3. INSTALL NO. 1 CONSOLE BOX INSERT FRONT |
![]() |
Engage the clip.
Install the No. 1 console box insert front with the 3 screws <F>.
| 4. INSTALL CONSOLE BOX ASSEMBLY |
![]() |
Install the 2 screws <F>.
![]() |
Install the console box assembly with the 2 bolts <G>.
| 5. INSTALL CONSOLE BOX CARPET |
![]() |
Install the console box carpet.
| 6. INSTALL CONSOLE BOX POCKET |
Install the console box pocket.
| 7. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Connect each connector.
![]() |
Engage the 4 claws.
Install the upper console panel sub-assembly with the 2 screws <F>.
| 8. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle) |
![]() |
Connect the connector.
Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 9. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle) |
![]() |
Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.
| 10. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle) |
with Seat Heater System:
Connect each connector.
![]() |
Engage the 6 claws and the 3 clips to install the floor shift position indicator housing sub-assembly.
| 11. INSTALL UPPER CONSOLE PANEL (for Manual Transaxle) |
![]() |
Engage the 2 claws and the 5 clips to install the upper console panel as shown in the illustration.
| 12. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
![]() |
Engage the 2 clips and install the No. 2 instrument cluster finish panel garnish.
| 13. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
![]() |
Engage the 2 clips and install the No. 1 instrument cluster finish panel garnish.
| 14. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) |
![]() |
Install the shift lever knob sub-assembly.
| 15. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
![]() |
Install the shift lever knob sub-assembly.
| 16. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY |
![]() |
Engage the 3 claws and 3 clips.
Install the 4 screws <B>.
Install the lower instrument panel sub-assembly with the bolt <A>.
| 17. INSTALL INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY |
![]() |
Engage the 4 claws and 2 guides and install the instrument panel No. 2 under cover.
| 18. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH |
| 19. INSTALL FRONT DOOR SCUFF PLATE RH |