WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System) > REGISTRATION |
| 1. REGISTRATION OF RECOGNITION CODE (USING INTELLIGENT TESTER) |
Turn the ignition switch to the ON position.
Select the add or rewrite mode according to the intelligent tester display.
The number of registered codes is indicated.
Registration of the door control transmitter.
If the add mode or rewrite mode has been selected, press the LOCK and UNLOCK switches on the transmitter simultaneously.
Within 3 seconds of releasing the LOCK and UNLOCK switches, press either of the switches on the door control transmitter.
The main body ECU automatically performs the power door LOCK-UNLOCK operation once in order to indicate whether registration has been completed correctly or not.
If registration is continued, the next recognition code must be registered in the door control transmitter within 30 seconds.
Completing the registration mode.
The registration mode will cease when any of the following occurs:
Perform the following after registration is completed.
Perform the wireless door lock control operation check (Click here).