Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Reclining Seat Type)

REAR SEAT ASSEMBLY (for Reclining Seat Type) > INSTALLATION

for Preparation Click here



1. INSTALL CENTER SEATBACK ASSEMBLY


    B140592
  1. Install the center seatback assembly with the 2 bolts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



2. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY RH


    B139079
  1. Install the separate type rear seatback assembly RH with the 2 bolts and 2 nuts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



    B139082E01
  1. Engage the 3 clamps and install the cover.



    B139078E01
  1. Install the rear seat belt.



3. INSTALL SEPARATE TYPE REAR SEATBACK ASSEMBLY LH


    B139077
  1. Install the separate type rear seatback assembly LH with the 2bolts and 2 nuts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



    B139081E01
  1. Engage the 3 clamps and install the cover.



    B139076E01
  1. Install the 2 rear seat belts.



4. INSTALL REAR SEATBACK COVER


5. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
  1. Install the rear center seat headrest assembly.



6. INSTALL REAR SEAT HEADREST ASSEMBLY
  1. Install the 2 rear seat headrest assemblies.



7. INSTALL REAR SEAT CUSHION ASSEMBLY


    B140591E01
  1. Attach the front hooks of the bench type rear seat cushion assembly to the vehicle body.

  1. Confirm that the seat cushion is firmly installed.

    NOTICE:
    When installing the bench type rear seat cushion assembly, make sure that the seat belt buckle is not under the bench type rear seat cushion assembly.