REAR SEAT ASSEMBLY (for Reclining Seat Type) > DISASSEMBLY |
| 1. REMOVE REAR BENCH TYPE SEAT CUSHION COVER |
Remove the 36 hog rings.

Remove the 16 hog rings and rear bench type seat cushion cover.

| 2. REMOVE REAR SEAT SHOULDER BELT GUIDE LH |
![]() |
Remove the 4 screws and 2 rear seat shoulder belt guides LH.
| 3. REMOVE REAR SEAT HEADREST SUPPORT (for LH Side) |
![]() |
Disengage the hook.
![]() |
Disengage the 2 claws and remove the rear seat headrest support.
| 4. REMOVE REAR SEAT HEADREST SUPPORT (for LH Side) |
| 5. REMOVE REAR SEPARATE TYPE SEATBACK COVER |
![]() |
Disengage the hooks and remove the rear seatback assembly.
![]() |
Remove the rear seat belt hook.
Remove the rear separate type seatback cover.
| 6. REMOVE REAR CENTER SEAT ARMREST ASSEMBLY |
![]() |
Remove the 2 bolts and 2 bushes.
Remove the rear center seat armrest assembly.
| 7. REMOVE REAR SEAT HEADREST SUPPORT |
![]() |
Disengage the 2 claws and remove the rear seat headrest support.
| 8. REMOVE REAR SEAT HEADREST SUPPORT |
| 9. REMOVE CENTER SEATBACK COVER SUB-ASSEMBLY |
![]() |
Remove the 2 hog rings.
Disengage the hooks and remove the center seatback cover sub-assembly.
| 10. REMOVE CENTER SEAT ARMREST PLATE INNER |
![]() |
Disengage the 11 claws and then remove the center seat armrest plate inner.
| 11. REMOVE REAR SEAT CENTER ARMREST BOX ASSEMBLY |
![]() |
Remove the 2 nuts.
Disengage the 2 claws and then remove the rear seat center armrest box assembly.
| 12. REMOVE REAR DOOR SCUFF PLATE LH |
![]() |
Disengage the 5 claws and 2 clips, and remove the rear door scuff plate LH.
| 13. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH |
| 14. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY |
![]() |
Remove the bolt.
Disengage the 2 clips and the claw and then separate the reclining remote control lever sub-assembly.
![]() |
Separate the rear seat reclining control cable and remove the reclining remote control lever sub-assembly.
| 15. REMOVE REAR SEAT RECLINING ADJUSTER ASSEMBLY |
![]() |
Remove the 4 bolts and rear seat reclining adjuster assembly.