REAR SEAT ASSEMBLY (for Reclining Seat Type) > REASSEMBLY |
| 1. INSTALL REAR SEAT RECLINING ADJUSTER ASSEMBLY |
![]() |
Install the rear seat reclining adjuster assembly with the 4 bolts.
| 2. INSTALL RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY |
![]() |
Install the rear seat reclining control cable.
![]() |
Engage the 2 clips and claw and then install the reclining remote control lever sub-assembly.
Install the bolt.
![]() |
Adjust the control lever to set the rear reclining adjuster assembly to its upper most position.
Pull plate A toward the front of the vehicle to lock the plate.
| 3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
| 4. INSTALL REAR DOOR SCUFF PLATE LH |
![]() |
Engage the 5 claws and 2 clips, then install the rear door scuff plate LH.
| 5. INSTALL REAR SEAT CENTER ARMREST BOX ASSEMBLY |
| 6. INSTALL CENTER SEAT ARMREST PLATE INNER |
| 7. INSTALL CENTER SEATBACK COVER SUB-ASSEMBLY |
![]() |
Install the center seatback cover sub-assembly with the hook.
Using hog ring pliers, install 2 new hog rings.
| 8. INSTALL REAR SEAT HEADREST SUPPORT |
| 9. INSTALL REAR SEAT HEADREST SUPPORT |
| 10. INSTALL REAR CENTER SEAT ARMREST ASSEMBLY |
| 11. INSTALL REAR SEPARATE TYPE SEATBACK COVER |
| 12. INSTALL REAR SEAT HEADREST SUPPORT (for LH Side) |
| 13. INSTALL REAR SEAT HEADREST SUPPORT (for LH Side) |
| 14. INSTALL REAR BENCH TYPE SEAT CUSHION COVER |
Using hog ring pliers, install 16 new hog rings.

Using hog ring pliers, install the rear bench type seat cushion cover to the seat cushion pad with 36 new hog rings.
