LUGGAGE COMPARTMENT DOOR > DISASSEMBLY |
| 1. REMOVE LUGGAGE COMPARTMENT DOOR COVER |
![]() |
Using a clip remover, remove the 13 clips and luggage compartment door cover.
| 2. REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY |
![]() |
Disconnect the rod.
![]() |
Disconnect the connector.
Remove the 2 bolts and luggage compartment door lock assembly.
| 3. REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY |
![]() |
Disconnect the cable and connector.
![]() |
Remove the 2 nuts and the luggage compartment door lock cylinder assembly.
| 4. REMOVE LUGGAGE COMPARTMENT OUTSIDE DOOR GARNISH SUB-ASSEMBLY |
![]() |
Put protective tape around the luggage compartment door outside garnish.
![]() |
Remove the 3 nuts.
![]() |
Using a moulding remover, disengage the 2 clips and remove the luggage compartment door outside garnish.
| 5. REMOVE REAR LIGHT ASSEMBLY LH |
![]() |
Disconnect the connector and clamp.
![]() |
Remove the 3 nuts.
Disengage the clip and remove the rear light assembly.
| 6. REMOVE REAR LIGHT ASSEMBLY RH |
| 7. REMOVE LICENSE PLATE LIGHT ASSEMBLY LH |
![]() |
Disconnect the connector.
Disengage the 2 claws and remove the license plate light assembly as shown in the illustration.
| 8. REMOVE LICENSE PLATE LIGHT ASSEMBLY RH |