Home › BODY › ENGINE HOOD / DOOR › LUGGAGE COMPARTMENT DOOR

LUGGAGE COMPARTMENT DOOR > DISASSEMBLY

for Preparation Click here



1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP (w/ Assist Grip)


    B189101E01
  1. Using a screwdriver, disengage the 3 claws and open the assist grip cover.

    HINT:
    Tape the screwdriver tip before use.



    B189102
  1. Remove the 2 screws and luggage compartment door assist grip.



2. REMOVE LUGGAGE COMPARTMENT DOOR COVER


    B135465
  1. Using a clip remover, remove the 13 clips and luggage compartment door cover.



3. REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY


    B136491
  1. Disconnect the rod.



    B136493
  1. Disconnect the connector.

  1. Remove the 2 bolts and luggage compartment door lock assembly.



4. REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY


    B136496
  1. Disconnect the cable and connector.



    B136497
  1. Remove the 2 nuts and the luggage compartment door lock cylinder assembly.



5. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH ASSEMBLY


    B135459E01
  1. Put protective tape around the luggage compartment door outside garnish assembly.



    B135460
  1. Remove the 3 nuts.



    B135461
  1. Using a moulding remover, disengage the 2 clips and remove the luggage compartment door outside garnish assembly.



6. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY (w/ Entry and Start System)
w/o Rear View Monitor System:
w/ Rear View Monitor System:


7. REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)
w/o Entry and Start System:
w/ Entry and Start System:


8. REMOVE REAR LIGHT ASSEMBLY LH


    E128231E01
  1. Disconnect the connector and clamp.



    E128227E01
  1. Remove the 3 nuts.

  1. Disengage the clip and remove the rear light assembly.



9. REMOVE REAR LIGHT ASSEMBLY RH

HINT:
Use the same procedure for the RH side and LH side.



10. REMOVE LICENSE PLATE LIGHT ASSEMBLY LH


    E128223E01
  1. Disconnect the connector.

  1. Disengage the 2 claws and remove the license plate light assembly as shown in the illustration.



11. REMOVE LICENSE PLATE LIGHT ASSEMBLY RH

HINT:
Use the same procedure for the RH side and LH side.