Home › BODY › ENGINE HOOD / DOOR › LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH

LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP (w/ Assist Grip)


    B189101E01
  1. Using a screwdriver, disengage the 3 claws and open the assist grip cover.

    HINT:
    Tape the screwdriver tip before use.



    B189102
  1. Remove the 2 screws and luggage compartment door assist grip.



2. REMOVE LUGGAGE COMPARTMENT DOOR COVER


    B135465
  1. Using a clip remover, remove the 13 clips and luggage compartment door cover.



3. REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY


    B136491
  1. Disconnect the rod.



    B136496
  1. Disconnect the cable and connector.



    B136497
  1. Remove the 2 nuts and luggage compartment door lock cylinder assembly.



4. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH ASSEMBLY


    B135459E01
  1. Put protective tape around the luggage compartment door outside garnish assembly.



    B135460
  1. Remove the 3 nuts.



    B135461
  1. Using a moulding remover, disengage the 2 clips and remove the luggage compartment door outside garnish assembly.



5. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY (w/o Rear View Monitor System)


    B212895
  1. Disengage the 2 clamps.

  1. Remove the 2 screws and luggage door opening switch assembly.



6. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY (w/ Rear View Monitor System)


    B212894
  1. Disconnect the connector.

  1. Disengage the 2 clamps.

  1. Remove the 2 screws and luggage door opening switch assembly.