Home › ENGINE ยท 2GR-FE › EMISSION CONTROL › HEATED OXYGEN SENSOR

HEATED OXYGEN SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL HEATED OXYGEN SENSOR (for Bank 2)


    A135725E01
  1. Using SST, install the heated oxygen sensor.

    SST
    09224-00010  

    Torque:
    44 N*m{ 449 kgf*cm , 32 ft.*lbf }



2. INSTALL HEATED OXYGEN SENSOR (for Bank 1)


    A135717E01
  1. Using SST, install the heated oxygen sensor.

    SST
    09224-00010  



3. INSTALL FRONT EXHAUST PIPE ASSEMBLY
  1. Install 2 new gaskets to the exhaust front pipe.



  1. Install the exhaust front pipe to the exhaust manifolds with the 4 nuts.


    A135720

    Torque:
    62 N*m{ 632 kgf*cm , 46 ft.*lbf }



4. INSTALL ENGINE UNDER COVER LH


5. INSTALL ENGINE UNDER COVER RH