Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL SWITCH

DOOR CONTROL SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


    B136405
  1. Install the power window regulator master switch assembly with the 3 screws.

  1. Connect the connector.



2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
  1. Connect each connector.



    B136402
  1. Engage the front door trim board with the 4 clips of the front door inner glass weatherstrip.



    B132840E01
  1. Engage the 9 clips and install the front door trim board to the front door panel.

  1. Install the 3 screws and clip (A).



3. INSTALL COURTESY LIGHT ASSEMBLY
  1. Connect the connector.



    B132839
  1. Engage the claw and install the courtesy light assembly.



4. INSTALL ASSIST GRIP COVER


    B132837
  1. Engage the 6 claws and install the assist grip cover.



5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    B132835
  1. Engage the 3 claws and install the front door inside handle bezel plug.



6. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH


    B132833
  1. Engage the 2 clips and install the front door lower frame bracket garnish.