OUTER REAR VIEW MIRROR > INSTALLATION |
| 1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY |
![]() |
Engage the claw to install the outer rear view mirror assembly.
Install the outer rear view mirror assembly with the 3 nuts.
Connect the connector.
| 2. INSTALL OUTER MIRROR COVER |
![]() |
Engage the 7 claws and install the outer mirror cover.
| 3. INSTALL OUTER REAR VIEW MIRROR GLASS (w/o Mirror Heater) |
![]() |
Engage the 2 claws on the upper part of the outer rear view mirror glass to the outer rear view mirror.
Engage the 2 claws on the lower part of the outer rear view mirror glass to the outer rear view mirror as shown in the illustration.
| 4. INSTALL OUTER REAR VIEW MIRROR GLASS (w/ Mirror Heater) |
![]() |
Connect the connector.
![]() |
Engage the 2 claws on the upper part of the outer rear view mirror glass to the outer rear view mirror.
Engage the 2 claws on the lower part of the outer rear view mirror glass to the outer rear view mirror as shown in the illustration.
| 5. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP |
![]() |
Engage the 4 claws and install the front door inner glass weatherstrip.
| 6. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY |
Connect each connector.
![]() |
Engage the front door trim board with the 4 clips of the front door inner glass weatherstrip.
![]() |
Engage the 9 clips and install the front door trim board to the front door panel.
Install the 3 screws and clip (A).
| 7. INSTALL COURTESY LIGHT ASSEMBLY |
Connect the connector.
![]() |
Engage the claw and install the courtesy light assembly.
| 8. INSTALL ASSIST GRIP COVER |
![]() |
Engage the 6 claws and install the assist grip cover.
| 9. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG |
![]() |
Engage the 3 claws and install the front door inside handle bezel plug.
| 10. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH |
![]() |
Engage the 2 clips and install the front door lower frame bracket garnish.