Home › BODY › MIRROR › OUTER REAR VIEW MIRROR

OUTER REAR VIEW MIRROR > INSTALLATION

for Preparation Click here



1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY


    E180292
  1. Connect the connector.

  1. Install the side turn signal light assembly with the 3 screws.



2. INSTALL OUTER MIRROR COVER


    B212910
  1. Engage the 7 claws and install the outer mirror cover.



3. INSTALL OUTER REAR VIEW MIRROR GLASS (w/o Mirror Heater)


    B136903
  1. Engage the 2 claws on the upper part of the outer rear view mirror glass to the outer rear view mirror.

  1. Engage the 2 claws on the lower part of the outer rear view mirror glass to the outer rear view mirror as shown in the illustration.



4. INSTALL OUTER REAR VIEW MIRROR GLASS (w/ Mirror Heater)


    B136902
  1. Connect the connector.



    B136903
  1. Engage the 2 claws on the upper part of the outer rear view mirror glass to the outer rear view mirror.

  1. Engage the 2 claws on the lower part of the outer rear view mirror glass to the outer rear view mirror as shown in the illustration.



5. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER


    B224350
  1. Engage the claw of the outer rear view mirror assembly with cover.

  1. Install the outer rear view mirror assembly with cover with the 3 nuts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. Connect the connector.



6. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP


    B136876
  1. Engage the 4 claws and install the front door inner glass weatherstrip.



7. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
  1. Connect each connector.



    B136402
  1. Engage the front door trim board with the 4 clips of the front door inner glass weatherstrip.



    B132840E01
  1. Engage the 9 clips and install the front door trim board to the front door panel.

  1. Install the 3 screws and clip (A).



8. INSTALL COURTESY LIGHT ASSEMBLY
  1. Connect the connector.



    B132839
  1. Engage the claw and install the courtesy light assembly.



9. INSTALL ASSIST GRIP COVER


    B132837
  1. Engage the 6 claws and install the assist grip cover.



10. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    B132835
  1. Engage the 3 claws and install the front door inside handle bezel plug.



11. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH


    B132833
  1. Engage the 2 clips and install the front door lower frame bracket garnish.