Home › SECURITIES › THEFT DETERRENT › THEFT DETERRENT SYSTEM (w/o Entry and Start System)

THEFT DETERRENT SYSTEM (w/o Entry and Start System) > Horn Circuit


DESCRIPTION

When the theft deterrent system is switched from the armed state to the alarm sounding state, the main body ECU transmits a signal to cause the horn to sound at intervals of 0.4 seconds.

WIRING DIAGRAM


B139444E01


INSPECTION PROCEDURE

1.INSPECT HORNS
  1. Press the horn switch and check if the horns sound.

    Result:

    Result
    Go to
    Horns sound
    A
    Horns do not sound
    B



B
GO TO HORN SYSTEM (Click here)
A

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE