Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › CLEARANCE WARNING ECU

CLEARANCE WARNING ECU > REMOVAL

for Preparation Click here



1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT


2. REMOVE SPARE WHEEL COVER CLAMP


3. REMOVE SPARE WHEEL COVER ASSEMBLY


4. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    B136879
  1. Remove the 2 screws and the 2 No. 1 luggage compartment trim hooks.



5. REMOVE REAR FLOOR FINISH PLATE


    B136852
  1. Disengage the 7 clips and remove the rear floor finish plate.



6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH


    B136855
  1. Remove the 2 clips and the luggage compartment inner trim cover RH.



7. REMOVE CLEARANCE WARNING ECU ASSEMBLY
  1. w/ Sliding Roof:

    1. Disengage the sliding roof drain hose.



    E134843
  1. Disconnect the connector.



    E134871
  1. Remove the bolt and clearance warning ECU assembly.