Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › CLEARANCE WARNING BUZZER

CLEARANCE WARNING BUZZER > INSTALLATION

for Preparation Click here



1. INSTALL CLEARANCE WARNING BUZZER


    E163130
  1. Engage the clamp and install the clearance warning buzzer.

  1. Connect the connector.



2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
  1. Connect each connector.



    B133997E01
  1. Engage the 4 claws.

  1. Install the upper console panel sub-assembly with the 2 screws <F>.



3. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle)


    B226097
  1. Connect the connector.

  1. Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.



4. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)


    B137277
  1. Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.



5. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle)
  1. with Seat Heater System:

    1. Connect each connector.



    B226065
  1. Engage the 6 claws and the 3 clips to install the floor shift position indicator housing sub-assembly.



6. INSTALL UPPER CONSOLE PANEL (for Manual Transaxle)


    B137276
  1. Engage the 2 claws and the 5 clips to install the upper console panel as shown in the illustration.



7. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    B226064
  1. Engage the 2 clips and install the No. 2 instrument cluster finish panel garnish.



8. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    B226063
  1. Engage the 2 clips and install the No. 1 instrument cluster finish panel garnish.



9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)


    B227961
  1. Install the shift lever knob sub-assembly.



10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


    B137273
  1. Install the shift lever knob sub-assembly.