WINDOW GLASS ANTENNA WIRE > REPAIR |
| 1. WINDOW GLASS ANTENNA WIRE |
![]() |
![]() |
Check the voltage at the center of each wire, as shown in the illustration.
| 2. REPAIR WINDOW GLASS ANTENNA WIRE |
![]() |
Clean the broken wire tips with a grease, wax and silicone remover.
Place masking tape along both sides of the wire to be repaired.
Thoroughly mix the repair agent (Dupont paste No. 4817 or equivalent).
![]() |
Using a fine tip brush, apply a small amount of the repair agent to the wire.
After a few minutes, remove the masking tape.