Home › BODY ELECTRICAL › LIGHTING › LICENSE PLATE LIGHT ASSEMBLY

LICENSE PLATE LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL LICENSE PLATE LIGHT ASSEMBLY


    E128223
  1. Engage the 2 claws to install the license plate light assembly.

  1. Connect the connector.



2. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH


    B135462
  1. Engage the 2 clips and install the luggage compartment door outside garnish assembly.



    B135460
  1. Install the 3 nuts.



3. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY


    B136497
  1. Install the luggage compartment door lock cylinder with the 2 nuts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }



    B136496
  1. Connect the cable and connector.



    B136492
  1. Connect the rod.



4. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    B135465
  1. Install the luggage compartment door cover with the 13 clips.



5. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP (w/ Assist Grip)


    B189102
  1. Install the luggage compartment door assist grip with the 2 screws.



    B189103
  1. Engage the 3 claws and close the assist grip cover.