Home › BODY ELECTRICAL › LIGHTING › LICENSE PLATE LIGHT ASSEMBLY

LICENSE PLATE LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP (w/ Assist Grip)


2. REMOVE LUGGAGE COMPARTMENT DOOR COVER


    B135465
  1. Using a clip remover, remove the 13 clips and luggage compartment door cover.



3. REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY


    B136491
  1. Disconnect the rod.



    B136496
  1. Disconnect the cable and connector.



    B136497
  1. Remove the 2 nuts and luggage compartment door lock cylinder assembly.



4. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH


    B135459E01
  1. Put protective tape around the luggage compartment door outside garnish assembly.



    B135460
  1. Remove the 3 nuts.



    B135461
  1. Using a moulding remover, disengage the 2 clips and remove the luggage compartment door outside garnish assembly.



5. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    E128223E01
  1. Disconnect the connector.

  1. Disengage the 2 claws and remove the license plate light assembly as shown in the illustration.