Home › BODY ELECTRICAL › LIGHTING › HIGH MOUNTED STOP LIGHT ASSEMBLY

HIGH MOUNTED STOP LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT CUSHION ASSEMBLY


    B134699E01
  1. Detach the 2 front hooks of the seat cushion from the vehicle body.

    NOTICE:
    Follow the instructions below carefully as the cushion frame can be deformed easily.


    1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

    2. Repeat the step above for the other hook.

  1. Remove the seat cushion.



2. REMOVE REAR SEAT HEADREST ASSEMBLY


3. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY


4. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY LH (for Fold Down Seat Type)


    B136539
  1. Remove the 2 bolts and separate type rear seatback assembly LH.



5. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY RH (for Fold Down Seat Type)


    B134700
  1. Remove the 2 bolts and separate type rear seatback assembly RH.



6. REMOVE REAR SIDE SEAT BACK ASSEMBLY LH (for Fold Down Seat Type)


    B136561
  1. Remove the bolt and rear side seatback assembly LH.



7. REMOVE REAR SIDE SEAT BACK ASSEMBLY RH (for Fold Down Seat Type)

HINT:
Use the same procedures for the RH side and LH side.



8. REMOVE REAR SEAT BACK COVER (for Reclining Seat Type)


    B139075
  1. Using a screwdriver, detach the claws and remove the 2 rear seatback covers.

    NOTICE:
    1. Tape the screwdriver tip before use.
    2. Use the same procedures for the RH side and LH side.



9. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY LH (for Reclining Seat Type)


    B139076E01
  1. Separate the 2 rear seat belts.



    B139081E01
  1. Disengage the 3 clamps and then separate the cover.



    B139077
  1. Remove the 2 bolts and 2 nuts and separate type rear seatback assembly LH.



10. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY RH (for Reclining Seat Type)


    B139078E01
  1. Separate the rear seat belt.



    B139082E01
  1. Disengage the 3 clamps and then separate the cover.



    B139079
  1. Remove the 2 bolts and 2 nuts and separate type rear seatback assembly RH.



11. REMOVE CENTER SEAT BACK ASSEMBLY (for Reclining Seat Type)


    B139080
  1. Remove the 2 bolts and center seatback assembly.



12. REMOVE REAR DOOR SCUFF PLATE LH


    B132068
  1. Disengage the 5 claws and 2 clips, and remove the rear door scuff plate LH.



13. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH


14. REMOVE REAR DOOR SCUFF PLATE RH

HINT:
Use the same procedures for the RH side and the LH side.



15. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH


16. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY LH (for Reclining Seat Type)


    B139083
  1. Remove the bolt.

  1. Disengage the 2 clips and the claw and then separate the reclining remote control lever sub-assembly.



    B139084
  1. Separate the rear seat reclining control cable and remove the reclining remote control lever sub-assembly.



17. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY RH (for Reclining Seat Type)


18. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH


    B132028
  1. Remove the 2 nuts and child restraint seat anchor bracket sub-assembly.



19. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH


    B132000
  1. Remove the bolt and disconnect the floor end of the rear seat inner with center belt assembly LH.



20. REMOVE ROOF SIDE INNER GARNISH LH


    B132063
  1. Disengage the 5 clips and 2 claws, and remove the roof side inner garnish LH.



21. REMOVE ROOF SIDE INNER GARNISH RH

HINT:
Use the same procedures for the RH side and the LH side.



22. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY (for LH Side)


    B132006
  1. Remove the bolt and disconnect the floor end of the rear seat outer belt assembly.



23. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY (for RH Side)


    B132007
  1. Remove the bolt and disconnect the floor end of the rear seat outer belt assembly.



24. REMOVE REAR SEAT SHOULDER BELT COVER


    B132011E01
  1. Using a screwdriver, disengage the 4 claws and remove the rear seat shoulder belt cover.

    HINT:
    1. Tape the screwdriver tip before use.
    2. Use the same procedures for the RH side and LH side.



25. REMOVE REAR SEAT SHOULDER BELT HOLE COVER


    B132013E02
  1. Using a screwdriver, disengage the 4 claws and remove the rear seat shoulder belt hole cover.

    HINT:
    Tape the screwdriver tip before use.



26. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (for Fold Down Seat Type)


    B132022
  1. Disconnect the connector.

  1. Disengage the 4 clips and the 5 claws.

  1. Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly then remove the package tray trim panel assembly.



27. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (for Reclining Seat Type)


    B132139
  1. Disconnect the connector.

  1. Disengage the 4 clips and the 5 claws.

  1. Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly then remove the package tray trim panel assembly.



28. REMOVE CENTER STOP LIGHT SET


    E128222
  1. Disconnect the connector.

  1. Remove the 2 screws and the center stop light set.