Home › ENGINE ยท 2AZ-FE › IGNITION › IGNITION COIL

IGNITION COIL > INSTALLATION

for Preparation Click here



1. INSTALL IGNITION COIL ASSEMBLY


    A124400
  1. Install the 4 ignition coils with the 4 bolts.

    Torque:
    9.0 N*m{ 92 kgf*cm , 80 in.*lbf }

  1. Connect the 4 ignition coil connectors.



2. INSTALL NO. 1 ENGINE COVER


    A134904
  1. Install the engine cover with the 2 nuts.

    Torque:
    9.0 N*m{ 92 kgf*cm , 80 in.*lbf }



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
6.9 N*m{ 70 kgf*cm , 61 in.*lbf }