Home › ENGINE ยท 2AZ-FE › LUBRICATION › OIL PUMP

OIL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL OIL PUMP COVER


    B011431E01
  1. Install the oil pump cover with the 5 bolts.

    Torque:
    8.8 N*m{ 90 kgf*cm , 78 in.*lbf }



2. INSTALL OIL PUMP RELIEF VALVE
  1. Coat the relief valve with engine oil.



    A052074E02
  1. Insert the relief valve and spring into the pump body hole.

  1. Using a 27 mm socket wrench, install the plug.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }



3. INSTALL OIL PUMP STRAINER


    B011430E01
  1. Install a new gasket and the oil strainer with the 2 nuts.

    Torque:
    8.8 N*m{ 90 kgf*cm , 78 in.*lbf }