Home › BODY › ENGINE HOOD / DOOR › LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH

LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH > INSPECTION

for Preparation Click here



1. INSPECT LUGGAGE DOOR OPENING SWITCH ASSEMBLY (w/ Entry and Start System)


    B220762E01
  1. Disconnect the switch connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester connection
    Condition
    Specified condition
    4 - 8
    Luggage door opening switch not pushed (OFF)
    10 kΩ or higher
    Luggage door opening switch pushed (ON)
    Below 1 Ω