SLIDING ROOF SYSTEM > INITIALIZATION |
| INITIALIZE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY |
Initialization
| Condition of Sliding Roof | Proceed to |
| Auto slide open and close/tilt up and down function does not operate. | Procedure A |
| Automatically moves, but the sliding roof glass does not stop at the right position (displacement occurs). Or, the sliding roof glass moves in the reverse direction during tilt down operation. | Procedure B |
| Automatically moves, but the sliding roof glass moves in the reverse direction during slide close operation. | Procedure C |
| When drive parts or the sliding roof glass is removed/installed or replaced. | Procedure D |
Procedure A
Procedure B
Procedure C
Procedure D
![]() |