Home › BODY › EXTERIOR › NAME PLATE

NAME PLATE > INSTALLATION

for Preparation Click here


HINT:
When installing the name plate, heat the vehicle body and name plate using a heat light.

Heating temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Name Plate
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body and name plate excessively.



1. INSTALL NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Clean the name plate. (If reusing the name plate)

    1. Using a heat light, heat the name plate.

    2. Remove the double-sided tape from the name plate.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the name plate.



  1. Install the name plate.


    B137206E01


    1. Using a heat light, heat the vehicle body and name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the name plate.



2. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Clean the name plate. (If reusing the name plate)

    1. Using a heat light, heat the name plate.

    2. Remove the double-sided tape from the name plate.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the name plate.



  1. Install the name plate.


    B137576E01


    1. Using a heat light, heat the vehicle body and name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the name plate.



3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Clean the name plate. (If reusing the name plate)

    1. Using a heat light, heat the name plate.

    2. Remove the double-sided tape from the name plate.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the name plate.



  1. Install the name plate.


    B137575E01


    1. Using a heat light, heat the vehicle body and name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the name plate.