Home › BODY ELECTRICAL › LIGHTING › AUTOMATIC LIGHT CONTROL SENSOR

AUTOMATIC LIGHT CONTROL SENSOR > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 DEFROSTER NOZZLE GARNISH


    B134011E01
  1. Disengage the 8 clips and the 4 guides.

  1. Disconnect each connector and remove the No. 1 defroster nozzle garnish.



2. REMOVE AUTOMATIC LIGHT CONTROL SENSOR


    E128234
  1. Disengage the 2 claws and remove the automatic light control sensor.