GLOVE BOX LIGHT > INSTALLATION |
| 1. INSTALL GLOVE BOX LIGHT ASSEMBLY |
![]() |
Engage the 2 claws and install the glove box light assembly.
Connect the connector.
| 2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY |
![]() |
Engage the 3 claws and 3 clips.
Install the 4 screws <B>.
Install the lower instrument panel sub-assembly with the bolt <A>.
| 3. INSTALL INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY |
![]() |
Engage the 4 claws and 2 guides and install the instrument panel No. 2 under cover.
| 4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH |
| 5. INSTALL FRONT DOOR SCUFF PLATE RH |