GLOVE BOX LIGHT > REMOVAL |
| 1. REMOVE FRONT DOOR SCUFF PLATE RH |
| 2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH |
| 3. REMOVE INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY |
![]() |
Disengage the 4 claws.
Disengage the 2 guides and remove the No. 2 under cover sub-assembly.
| 4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY |
Remove the bolt <A>.
![]() |
Remove the 4 screws <B>.
Disengage the 3 claws and 3 clips, and then remove the lower instrument panel sub-assembly.
| 5. REMOVE GLOVE BOX LIGHT ASSEMBLY |
![]() |
Disconnect the connector.
Disengage the 2 claws and remove the glove box light assembly.