Home › BODY ELECTRICAL › LIGHTING › BACK DOOR COURTESY SWITCH

BACK DOOR COURTESY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY


    E119982
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Door is closed
    10 kΩ or higher
    1 - 2
    Door is open
    Below 1 Ω

    If the result is not as specified, replace the luggage compartment door lock assembly.