Home › BRAKE › BRAKE › BRAKE PEDAL

BRAKE PEDAL > DISASSEMBLY

for Preparation Click here



1. REMOVE STOP LIGHT SWITCH ASSEMBLY


    C132725
  1. Turn the stop light switch assembly and remove it as shown in the illustration.



2. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER
  1. Remove the stop light switch mounting adjuster.



3. REMOVE BRAKE PEDAL SUB-ASSEMBLY


    C132727
  1. Remove the bolt and the nut.

  1. Remove the 2 brake pedal bushings, the brake pedal shaft collar, and the brake pedal sub-assembly.



4. REMOVE BRAKE PEDAL PAD
  1. Remove the brake pedal pad.