BRAKE PEDAL > REASSEMBLY |
| 1. INSTALL BRAKE PEDAL PAD |
Install the brake pedal pad.
| 2. INSTALL BRAKE PEDAL SUB-ASSEMBLY |
Apply lithium soap base glycol grease to 2 new brake pedal bushings.
![]() |
Install the brake pedal sub-assembly, the 2 brake pedal bushings, and the brake pedal shaft collar to the brake pedal support assembly with the bolt and the nut as shown in the illustration.
| 3. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER |
Install the stop light switch mounting adjuster.
| 4. TEMPORARILY TIGHTEN STOP LIGHT SWITCH ASSEMBLY |
![]() |
Temporarily tighten the stop light switch assembly as shown in the illustration.