PARKING BRAKE PEDAL > DISASSEMBLY |
| 1. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY |
![]() |
Using a screwdriver, pull up the parking brake pedal claw.
![]() |
Remove the lock nut and the No. 1 wire adjusting nut.
![]() |
Using needle-nose pliers, remove the clip and the No. 1 parking brake cable from the parking brake pedal assembly.
| 2. REMOVE PARKING BRAKE SWITCH ASSEMBLY |
![]() |
Remove the screw and the parking brake switch assembly.
| 3. REMOVE PARKING PEDAL PAD |
![]() |
Remove the parking pedal pad.