Home › BRAKE › PARKING BRAKE › PARKING BRAKE PEDAL

PARKING BRAKE PEDAL > REASSEMBLY

for Preparation Click here



1. INSTALL PARKING PEDAL PAD


    C132702
  1. Install the parking pedal pad to the parking brake pedal assembly.



2. INSTALL PARKING BRAKE SWITCH ASSEMBLY


    C132700
  1. Install the parking brake switch assembly with the screw.

    Torque:
    1.0 N*m{ 10 kgf*cm , 9.0 in.*lbf }



3. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY


    C143747E01
  1. Pass the No. 1 parking brake cable assembly through the pedal guide.

  1. Using a brass bar and a hammer, install the clip to the No. 1 parking brake cable assembly.



    C132697
  1. Temporarily tighten the lock nut and the No. 1 wire adjusting nut.

    NOTICE:
    Fully tighten the lock nut and the No. 1 wire adjusting nut when adjusting the parking brake pedal travel.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



    C132699
  1. Bend the parking brake pedal claw.