Home › BRAKE › PARKING BRAKE › PARKING BRAKE LEVER

PARKING BRAKE LEVER > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY


    C131912
  1. Using a screwdriver, pull up the parking brake lever claw.



    C132670E01
  1. Remove the lock nut, the No. 1 wire adjusting nut, and the No. 1 parking brake cable assembly from the parking brake lever sub-assembly.



2. REMOVE PARKING BRAKE SWITCH ASSEMBLY


    C132654
  1. Remove the screw and the parking brake switch assembly.