Home › BRAKE › PARKING BRAKE › PARKING BRAKE LEVER

PARKING BRAKE LEVER > REASSEMBLY

for Preparation Click here



1. INSTALL PARKING BRAKE SWITCH ASSEMBLY


    C132654
  1. Install the parking brake switch assembly with the screw.

    Torque:
    1.0 N*m{ 10 kgf*cm , 9.0 in.*lbf }



2. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY
  1. Pass the No. 1 parking brake cable assembly through the parking brake lever sub-assembly.



    C132670E01
  1. Temporarily tighten the lock nut and the No. 1 wire adjusting nut.

    NOTICE:
    Fully tighten the lock nut when adjusting the parking brake lever travel.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }



    C132671
  1. Bend the parking brake lever claw.